[TX_Ducati]

Purchased this nice and robust Motorcycle Dolly that is really well made and super sturdy. Moves around fairly easy on an excellent wheel system that locks/unlocks as needed. No more 8+ turns in my garage........Drive on, side stand down, then roll dolly where I want it. Our wide tire fits good and the whole bike is supported soundly. Great customer service and friendly owner. Look them up: Motomover Motorcycle Dolly.

 

[TX_Ducati]

Few more pics........The dolly wasn't cheap but it's a really quality product (so it's about as pricey as a Bursig stand which I just don't have the need for yet nor was Bursig an option on Amazon website, had to use my Points for purchase as they were soon to expire). I believe he only makes one model which comes coated with a Line-X type coating. Maybe a good option for your other big Cruiser Bikes as well. The owner Rick is a really friendly guy, you can find more info on his website: https://motomover.com

 

[Throttle Girl]

Mind me asking which one you got and roughly how much you paid...?

 

[Roadrunner]

That's pretty sweet! I could use something like that in my garage - not enough room

 

[ReidMcT]

I would think that a Bursig stand with wheels would be much more versatile and take up much less floor space. Just a few dollars more.

 

[skidrumr]

+1 on the Bursig! The stand above costs the same but doesn't allow you to have the bike upright, access the wheels all the way around or get underneath easily. With the Bursig you can take your bike down to the frame & motor if you want. I've even run my Diavel on the stand through gears for inspection and adjust the clutch engagement. And I am able to slide it off to the side of the garage to get my car in.

 

[84hd79]

I was just looking at this the other day and was wondering how the bike would fit. Thanks for the pics

 

[Ducater]

At motea.com you can find lots of options for movers.

 

[ozzie21]

This seems to work pretty good. It doesn't take up a lot of space either. But the standard model only works well on motorcycles that have a centerstand. They have a model that can lift bikes that don't have a centerstand but there needs to be a frame for the center lifting bar to work as designed, so the Ducati trellis frame makes it a challenge to be able to use this Park-N-Move type of dolly. Too bad. Anyway anyone that can think of a way to make this work, go for it. If not, its there to use for anyone with a model of motorcycle it is compatible with....

https://www.youtube....du57bNSQ&t=314s

https://www.youtube....h?v=rb0a0aDISA4

 

[Spunout]

Another recommendation for the Bursig. It takes up less space than the stand in this thread and is way more practical for washing and working on the bike.

 

[ab414399]

At motea.com you can find lots of options for movers.

Can I find office movers there??