Ducati Diavel Motorcycles Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
206 Posts
Discussion Starter · #1 ·
Hi fellow Diavellers, I am struggling to find a good replacement for my stock handlebar - I have a full carbon black 2012 model and want to change the silver painted version with a black anodised or powder coated version.

I have checked all the regulars (Renthal, Rizoma etc) but cant seem to find a good one.

Anyone bought some?

I am having to take my steering head apart to adjust the headstock bearings and thought it was a the right time to change the bars.

I am in the UK so would have to buy on web for some overseas locations.
 

·
Registered
Joined
·
570 Posts
Check Johnno's thread 'Bar Swap' under modifications. There's a few mentioned there.
 

·
A White Carbon is NOT an AMG
Joined
·
2,421 Posts
if you like the std bend but want black order a set off a cromo, they're not expensive at all surprisingly
 

·
ForzaRio, DCSP, DucatiBH & SquadraSul D.O.Cs
Joined
·
1,770 Posts
I had the same dilemma, and saw the johnno's posts as well (Very good ones) and could not help myself.
After tons of opinions, even to take the original off and paint it (worse idea, it will strip sonner or latter and you'll be without your bike while wait it), I finished buying the one CropDuster mentioned. the Cromo OEM.

Part Number #36011182BB

 

·
Registered
Joined
·
570 Posts
For what it's worth, I just purchased the LSL drag bar (mainly because I didn't want as much sweep back, a straighter grip and a little more forward lean).
Check out LSL handlebars, they have a good range (but remember if not OEM, the head clamp is very wide on the Diavel and only a few will fit it).
 

·
Registered
Joined
·
556 Posts
Just fitted a set of 2015 Diavel dark black bars to my 2011 Diavel.

Cost £100 from my local Duc dealer, and very easy to fit.
 

·
Registered
Joined
·
335 Posts
Sorry Potts, I coulnt tell you. Don't get flat drag bars though as they won't clear the tank

I'll see if the model is marked on them
 

·
ɹǝqɯǝW ʇɹǝdxƎ
Joined
·
4,312 Posts
Hi fellow Diavellers, I am struggling to find a good replacement for my stock handlebar - I have a full carbon black 2012 model and want to change the silver painted version with a black anodised or powder coated version.

I have checked all the regulars (Renthal, Rizoma etc) but cant seem to find a good one.

Anyone bought some?

I am having to take my steering head apart to adjust the headstock bearings and thought it was a the right time to change the bars.

I am in the UK so would have to buy on web for some overseas locations.
I paid $20.00 US to have it powder coated almost 3 years ago and still look like brand new.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top