Joined
·
70 Posts
Since Ducati won’t make one, decided to build one of one.
Diavel 1260SP
1 - 9 of 9 Posts
Joined
·
70 Posts
What kind of moods have you done @firstdiavel ?
Joined
·
70 Posts
Nothing major. It has the Termi with upmap and DP windscreen. I swapped out the wheels with the Gen 1 Diavel Carbon wheels. Got the side mount license kit from RNC to clean up the rear. Bought the passenger cover from CC Racing. The rest is the SP1-inspired wrap.
Joined
·
70 Posts
A few additional angles.
Attachments
Just an additional question about the passenger seat cover. How easy or fast can it be removed / installed? I am just curious if this is meant more as permanent installation or if it is fast to remove in case you would like to put on a tail bag for a longer trip or take a trip with a passenger.
Joined
·
70 Posts
The cover comes with dedicated screws to screw into the seat. It doesnt take more than 5 minutes to take it off (unless you take cigarette breaks between unscrewing two screws). It’s a tight fit so you pretty much need to sit on the seat for it to latch back into place with the cover on. I plan on using the Diavel 1260 dedicated tank bag so I will never need the passenger seat.
1 - 9 of 9 Posts
