de"LIGHT have started selling that rearsets with price 92,400JPN.
https://www.delight-...cts_detail/479/
I will buy it, install and ride, then report later.
https://www.delight-...cts_detail/479/
I will buy it, install and ride, then report later.
de"LIGHT's Rearsets
Anyone is interested in rearsets for Diavel 1260/S?
Rearsets which has been developed by a Ducati dealer named de"LIGHT would be sell this or next month.
Attached photo shows prototype of the rearsets.
This rearsets has following four positions, which values mean difference from the stock position.
1. 73mm backward 13mm upward
2. 73mm backward 23mm upward
3. 93mm backward 13mm upward
4. 93mm backward 23mm upward
Peg end of this rearsets is located 115mm from swingarm pivot. Meanwhile end of stock footpeg is located 150mm from swingarm pivot. So overhang of footpeg get 35mm smaller than stock footpeg. Lean angle limit will increase not only by peg's rising but also by overhang's decrease.
I guess this rearsets would cost 1,000USD or 12,000USD.
I hardly wait to buy and install it.
de"LIGHT's URL: https://www.delight-suzuka.co.jp/products/
Rearsets which has been developed by a Ducati dealer named de"LIGHT would be sell this or next month.
Attached photo shows prototype of the rearsets.
This rearsets has following four positions, which values mean difference from the stock position.
1. 73mm backward 13mm upward
2. 73mm backward 23mm upward
3. 93mm backward 13mm upward
4. 93mm backward 23mm upward
Peg end of this rearsets is located 115mm from swingarm pivot. Meanwhile end of stock footpeg is located 150mm from swingarm pivot. So overhang of footpeg get 35mm smaller than stock footpeg. Lean angle limit will increase not only by peg's rising but also by overhang's decrease.
I guess this rearsets would cost 1,000USD or 12,000USD.
I hardly wait to buy and install it.
de"LIGHT's URL: https://www.delight-suzuka.co.jp/products/
Attachments
1 - 14 of 14 Posts
I bought a kito of de"LIGHT rearsets and installed on my Diavel 1260 S as attached photos, then rode today.
When stock footpegs were on, I felt fear if footpegs would hit road surface on corners, actually came off sometimies.
Now I got free of the fear.
If fine day, we can see Mt. Fuji on the 3rd photo view, but unfortunately clouds hid Fuji today.
When stock footpegs were on, I felt fear if footpegs would hit road surface on corners, actually came off sometimies.
Now I got free of the fear.
If fine day, we can see Mt. Fuji on the 3rd photo view, but unfortunately clouds hid Fuji today.
Attachments
Concerning Quickshifter Wiring:
Before de"LIGHT rearsets installed, tension come on quickshifter gauge when gear shifted up, and pressure did when gear shifted down.
After the installation, pressure comes when gear shifted up, and tension does when gear shifted down.
So, if quickshifter wiring is remained, tension and pressure signals transmitted to ECU are replaced each other. Quickshifter doesn't work correctly.
de"LIGHT supplied me with a short wire as attached photo, which inverts those signal lines.
Once I disconnected stock couplers of quickshifter, I connected the short wire between those stock couplers.
Before de"LIGHT rearsets installed, tension come on quickshifter gauge when gear shifted up, and pressure did when gear shifted down.
After the installation, pressure comes when gear shifted up, and tension does when gear shifted down.
So, if quickshifter wiring is remained, tension and pressure signals transmitted to ECU are replaced each other. Quickshifter doesn't work correctly.
de"LIGHT supplied me with a short wire as attached photo, which inverts those signal lines.
Once I disconnected stock couplers of quickshifter, I connected the short wire between those stock couplers.
Attachments
Hi Zhao,
As far as I see de"LIGHT product site, there is no folding footrest.
Foootests are fixed just with 8M bolts as attached diagram and photo. If you find some folding footrests on market, you may be able to use them.
But lean angle increases dramatically by this kit then folding footrests aren't necessary in my biased opinion.
As far as I see de"LIGHT product site, there is no folding footrest.
Foootests are fixed just with 8M bolts as attached diagram and photo. If you find some folding footrests on market, you may be able to use them.
But lean angle increases dramatically by this kit then folding footrests aren't necessary in my biased opinion.
Attachments
Hi Diavel’s Own
I responded to you via Conversations page at this site.
Sato Racing supply another option as following.
satoracing.com
I responded to you via Conversations page at this site.
Sato Racing supply another option as following.
SATO RACING | Rear Sets - Ducati Diavel 1260 ('20- )
satoracing.com
1 - 14 of 14 Posts
