There are 2 connections under the seat a round one and a oblong one, the oblong one looks like a battery charging connection and not sure what the round one does? Can o connect my to Tom rider to one of these? I have a usb connector that looks like it would fit the oblong one? Any advise welcome ????
Daveoe
You don't have a picture?
Have you S or non S modell?
There are one 4 pin connector for Bluetooth module if not installed. And one connector for Ducati Alarm.
You also have a connector for diagnostic/ battery (with use with adapter)
Bur in the front, you will find a power for Navi. Search around the Forum. It's a lot of information for this you search
Have you S or non S modell?
There are one 4 pin connector for Bluetooth module if not installed. And one connector for Ducati Alarm.
You also have a connector for diagnostic/ battery (with use with adapter)
Bur in the front, you will find a power for Navi. Search around the Forum. It's a lot of information for this you search
Yes, I did it on my pre-own '16
I mentioned it somewhere in the Xdiavel section.
Plug & play. Only activate by your Dealer
Strange?
I know several who have done it...
It's the same part number for the electrical wiring harness. Only add the Bluetooth module.
Of course your Dealer need to could handle the diagnostic tool, a drop down box in the menu needs to be activated. Approx like the heated grip...
I know several who have done it...
It's the same part number for the electrical wiring harness. Only add the Bluetooth module.
Of course your Dealer need to could handle the diagnostic tool, a drop down box in the menu needs to be activated. Approx like the heated grip...
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
