Hi all, first post here and it’s a question that may have been answered. Just wired up a new speaker system. It has 2 power wires which i temporarily put both on the positive terminal of the battery. Problem is if you forget and leave the system and it’ll drain the shit out of the battery. Does anyone know which fuse to jump into to get accessory power? Or has someone resolve this issue in a previous post? Any help would be greatly appreciated.
DonnyC
There is a plug with a 50mm "dummy" connector in it, normally used for connecting a navigation system.
Looking at the bike from the front, its just under the front left side of the tank (RH side sitting on bike). It should be easily visible if you are kneeling or sitting on the ground. It should be labeled "Nav System' or 12V|24W depending on year/market. A word of warning - the connected wires which you need to splice into are both black, so check with a 12v probe to see which is positive/negative.
See attached pics.
Looking at the bike from the front, its just under the front left side of the tank (RH side sitting on bike). It should be easily visible if you are kneeling or sitting on the ground. It should be labeled "Nav System' or 12V|24W depending on year/market. A word of warning - the connected wires which you need to splice into are both black, so check with a 12v probe to see which is positive/negative.
See attached pics.
Attachments
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
