Ducati Diavel Motorcycles Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hi all.
Final hurdle to the puzzle of removing engine. Got the two long rods supporting engine all ready to pop out but cant remove swingarm shaft. Manual says to use drift to knock out but from what I'm seeing. And I cant seem to see it any other way for looking. It looks like the shaft is sandwiched between the two parts of the frame and wont come out. I've loosened off both 22mm nuts from the recessed frame locations. And still with the nuts threaded in a few turns I can tap the shaft back and forth a few mil but the shaft seems to be locked in between the frame casings. I.e the shaft diameter is larger than the opening in the frame halves. I must he seeing it wrong. Any info would really help me out. I'm sick that the engine is coming out to begin with.....

Sent from my SM-J530F using Tapatalk
 

·
Registered
Joined
·
8,461 Posts
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top