Ducati Diavel Motorcycles Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Diavel General Discussion
    Diavel Cromo owner for 10 years, but 'bike sadly off road for past 2 years. Been trying to diagnose coolant leak into the termi pipes. New cylinder heads and gaskets haven't worked so looking like only route is a new/second hand/reconditioned engine. Any ideas, links to engines etc would be so...
  2. XDiavel General Discussions
    Hi Owners I've been planning on buying and modding and Xdiavel for a few years now. I was speaking to a guy who builds my bikes and he got some strongly negative feedback. Essentially His Friend owns a Ducati dealer and says that he's had to rebuild several engines for the Xdiavel. Upwards...
  3. Wanted Dead or Alive
    I am ready to do an engine swap on the motor I broke the crank on...I need a 2013 or below complete motor any one have one for sale or a leed on where I might locate one other than the one on ebay thank you
  4. Diavel General Discussion
    Hey folks, Here the chronology: 1) Bike's engine oil level was observed to be less - post 2nd service at 3000kms at around 5000kms mark - topped up by 800ml 2) Two weeks later, the oil level was again found to be down by 400ml at around 6000kms mark 3) During the time of 3rd service at 6000kms...
  5. Engine & Exhaust Tuning
    Just for fun, I took a number of temperature readings off engine components and tires on a 2013 Diavel after a 55-mile run on the interstate (45 miles) and secondary roads and streets (10 miles). Speed limits ranged from 55 to 70 mph and 25 to 45 mph, respectively. The ambient air temperatures...
  6. Diavel Mechanical & Maintenance
    My Diavel is leaking coolant through corroded freeze plugs. I cannot seem to find a reference to replacement plugs. I know that they should be a push fit. I have made a temporary repair using a defcon type of cement but I need to source replacement plugs. Can anyone help me with a part...
  7. Diavel Mechanical & Maintenance
    I haven't yet received my factory service manual, and I need to know the torque value for the nuts on the two long engine mount bolts. The bolts are #9 and the nuts are #3 on Drawing 022, page 64 of the parts fiche...
1-7 of 7 Results
Top