Ducati Diavel Motorcycles Forum banner
bearing
1-3 of 3 Results
  1. Diavel Mechanical & Maintenance
    G'day, While working through a slow crank/no start issue on my wife's 2012, I found this little gem which I thought that I would share. ~33,000km on the bike and I found early signs of failure of the ball bearing which supports the pinion end of the starter motor armature. The photos show...
  2. XDiavel General Discussions
    Hello All, Just to let you know the Eccentric Hub on the rear has failed on my XDiavel (4700m) owned from new. I arrived back from a ride out switched the bike off and then rolled it into the garage....heard an intermittent clicking type noise as i was wheeling it....3 times per rotation...
  3. Diavel Mechanical & Maintenance
    2011 with 16k and a output shaft bearing leak. Sound premature to anyone else? Can't find any information on any Diavel having the same problem.Ducati wont help with the 3k dollar repair any information will help. Thanks.
1-3 of 3 Results
Top