Cruise Control Nudge Buttons
Posted 02 August 2013 - 05:56 PM
Posted 02 August 2013 - 06:21 PM
Remove the intake grill cover. 2 hex screws.
Remove the side piece next to it.. I think 3 screws.
If you shine a light into there you will see a plug attached to the plastic intake tube inside.
I did not remove the entire fairing to access this i just simply unplugged it and installed the o2 manipulator.
I'm guessing its the same for the tuneboy. Correct me if im wrong.
Posted 28 September 2013 - 10:46 PM
Posted 30 September 2013 - 06:52 AM
Posted 30 September 2013 - 06:36 PM
Posted 01 October 2013 - 02:40 AM
If anyone is going to do this, it would be great to take pics or better yet a video.
That would be helpfull for others who will be doing it soon.
Posted 01 October 2013 - 01:21 PM
Posted 02 October 2013 - 06:25 AM
The part diagrams also show the two O2 sensors (#20) connecting down in that area so I'd at least start looking there. I'm hoping to do my Tuneboy/nudge button install as well as a Battery Tender connector within a few days. I'll try to confirm all this and get a few pics while I'm rooting around down there.
Seems like it would be pretty easy to follow the wire from the header in any case.
Posted 06 October 2013 - 02:15 PM
As mentioned, the front plug is much easier to find and is above the battery at the top of the belly pan compartment. It should be the only connection with the particular plug so should be easy enough to find
Posted 06 November 2013 - 05:43 PM
i did the install of the nudge buttons on the Left side of the handle bars down to the O2 sensor plug just above the battery as per these pics.
Tune works get for smoothing out the ride from 3-4k rpm.
Cruise works more smoothly at 110km/h than at 60kph.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users